Trango Broadband Atlas5010 Uživatelský manuál Strana 18

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 45
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 17
Configuration
Trango Broadband Wireless — Atlas5010 page 18
Syntax: ipconfig [<ip> <subnet> <gateway>]
Example:
#> ipconfig 10.8.2.140 255.255.255.240 10.8.2.129
New configuration: [ip] 10.8.2.140 [subnet mask] 255.255.255.240 [gateway]
10.8.2.129
save and activate ? (y/n) [ATTN] Telnet session will be terminated in 30
seconds.
Success.
#>
LEDs
LEDs are visible on the unit’s PCB between the reset button and the RJ-45 connector. The function of each
LED is described below:
LNK (green)
Green: On solid for an established 10BaseT or 100BaseT Ethernet Link.
SPEED
Green: Solid if 100BaseT, Blinks only if there is activity (TX or RX) on the network when a 100 MBit
connection is established. Off if a 10BaseT connection is established or if there is 10BaseT activity.
RSSI (4 LEDs)
Amber: Four LEDs
In all modes except “Survey”, the unit’s four yellow LEDs indicate the level of RF signal being
received from a VALID MU or RU as appropriate.
Yellow LED 1 : Begins blinking when RSSI is greater or equal to –90 dBm. On continuously at –85
dBm. This is the Leftmost LED
Yellow LED 2 : Begins blinking when RSSI is greater or equal to –80 dBm. On continuously at –75
dBm.
Yellow LED 3 : Begins blinking when RSSI is greater or equal to –70 dBm. On continuously at –65
dBm.
Yellow LED 4 : Begins blinking when RSSI is greater or equal to –60 dBm. On continuously at –55
dBm. This is the rightmost LED.
If no VALID MU or RU signal is detected the LEDs will not be on at all.
In addition, these 4 LEDs shall flash ON for 2 seconds, then OFF for 2 seconds to indicate the 'factory
reset' button has been activated and the reset successful.
ASSOCiation LED (green):
The ASSOC led blinks at the following rates:
- Once every second when unit is powered on but opmode is OFF.
- Twice per second while in opmode ON and scanning for an MU or RU.
- Solid after unit is associated with the RU or MU.
Zobrazit stránku 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 44 45

Komentáře k této Příručce

Žádné komentáře

Kern-sohn MBC 20K10M Handbücher

Bedienungsanleitungen und Benutzerhandbücher für Waage Kern-sohn MBC 20K10M.
Wir stellen 1 PDF-Handbücher Kern-sohn MBC 20K10M zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung






Weitere Produkte und Handbücher für Waage Kern-sohn

Modelle Dokumententyp
MBE 20K10 Bedienungsanleitung   KERN &amp; SOHN MBE 20K10 User Manual [en] [de] [fr] [it] , 12 Seiten
MPB 300K100P Bedienungsanleitung   KERN &amp; SOHN MPB 300K100P User Manual [en] [de] , 24 Seiten
MPE 250K100HM Bedienungsanleitung   KERN &amp; SOHN MPE 250K100HM User Manual [fr] [de] , 55 Seiten
MPD 250K100M Bedienungsanleitung   KERN &amp; SOHN MPD 250K100M User Manual [en] [it] [fr] [de] , 26 Seiten
MWS 400K100DM Bedienungsanleitung   KERN & SOHN MWS 400K100DM User Manual, 59 Seiten
MGB 150K100 Bedienungsanleitung   KERN &amp; SOHN MGB 150K100 User Manual [en] [fr] [de] , 8 Seiten
MFB 150K100 Bedienungsanleitung   KERN & SOHN MFB 150K100 User Manual, 13 Seiten
MXS 300K100M Addendum Bedienungsanleitung   KERN &amp; SOHN MXS 300K100M Addendum User Manual [en] [de] [fr] , 3 Seiten
MCB 300K100M Bedienungsanleitung   KERN &amp; SOHN MCB 300K100M User Manual [en] [pl] [de] , 52 Seiten
MCC 250K100M Bedienungsanleitung   KERN &amp; SOHN MCC 250K100M User Manual [en] [de] [fr] , 39 Seiten
MAP 130K1 Bedienungsanleitung   KERN & SOHN MAP 130K1 User Manual, 29 Seiten
MSB 80 Bedienungsanleitung    KERN & SOHN MSB 80 Manuel d'utilisation, 12 Seiten
MSC 100 Bedienungsanleitung    KERN & SOHN MSC 100 Manuel d'utilisation, 13 Seiten
MSF 200 Bedienungsanleitung    KERN &amp; SOHN MSF 200 Manuel d&#039;utilisation [en] [de] [fr] , 16 Seiten